Presenting the Mesa Boogie CabClone Cabinet Simulator and LoadBox, this one with 16 Ohm Impedance.
The Mesa Engineering CABCLONE™ is a passive Cabinet Simulator/Speaker+Mic alternative with a built-in Amp Load for amps rated at 150-watts or less. It provides a direct interface of your guitar amp’s Speaker Output to the input of a mixing console, microphone preamp or even direct to your converters (recorder), with or without the need for a speaker cabinet. It’s also a Compensated Headphone Driver that delivers a great sounding, great feeling headphone-friendly version of your amp’s Tone that’s perfect for late night practice sessions or anytime you want to play without others listening.
The Mesa Engineering CABCLONE™ is a passive Cabinet Simulator/Speaker+Mic alternative with a built-in Amp Load for amps rated at 150-watts or less. It provides a direct interface of your guitar amp’s Speaker Output to the input of a mixing console, microphone preamp or even direct to your converters (recorder), with or without the need for a speaker cabinet. It’s also a Compensated Headphone Driver that delivers a great sounding, great feeling headphone-friendly version of your amp’s Tone that’s perfect for late night practice sessions or anytime you want to play without others listening.
Whether for “direct” live performance, recording or just personal enjoyment of your favorite amp with headphones, the CABCLONE is a great sounding and feeling tool for any guitarist needing to capture great amp sounds quickly and easily.
What guitarist wouldn’t want to have one for their toolbox? Here’s an opportunity to use your favorite amplifier in situations where it may not have been possible or ideal in the past. Think of all the applications a CABCLONE™ would come in handy.
What guitarist wouldn’t want to have one for their toolbox? Here’s an opportunity to use your favorite amplifier in situations where it may not have been possible or ideal in the past. Think of all the applications a CABCLONE™ would come in handy.
• Late Night practicing – using the headphone out
• Recording in a Studio (especially your Home studio where volume or acoustic properties may be an issue) – using the Direct Out and taking advantage of the Internal Amp Load feature (no cabinet required)
• Live Performance – In place of a microphone (one less microphone for signal to bleed into) – using the Speaker Cab Out to still get the tone & feel on stage of your full rig
• Live Performance – In place of an IsoBox (ideal for the Church guitarist) – Your amp’s tone through the monitors or in ears - again, taking advantage of the Internal Amp Load feature (no cabinet required)
• Studio & Live Performance – In addition to a microphone – giving you the choice of the CABCLONE™ BALANCED DIRECT OUT, the Mic–or both–for the ability to blend them (in real time or later) in a mix session
Designed and Handcrafted in Petaluma, California, USA
Passive Design – No Power Supply Required
Built-In Internal Amp Load FOR AMPS RATED 150-WATTS OR LESS (auto-activates when no cable is connected to “Thru” Output)
¼” “Input” Jack (receives signal from amps speaker output)
¼” “Thru” Output Jack (defeats to Internal Load when no cable is connected)
3-Position Cabinet Voicing Switch - Open-Back, Closed-Back & Vintage Closed-Back Cabinet Simulations
Variable -30 to +4db DI Output Level Control with presets for Dynamic Mic Level (-30db), Instrument Level (-10db) & Line Level (+4db)
Balanced XLR Direct Output (controlled by the Variable DI Output Level Control)
Independent ¼” +4 Line Level “Slave” Output Jack (exact signal from amp’s speaker output, non-
simulated)
Compensated Headphone Output Jack (defeats balanced outputs when used)
Phase Switch – Normal (In) or Reverse (180°)
Ground Lift Switch
Removable Tilt-Back Stand (for use over an amp handle)
Dimensions (W/D/H): 6.7" x 6.40" x 2.30" without tilt-back stand (3.30” with tilt back stand)
170.18mm x 162.56mm x 58.42mm without tilt-back stand (83.82” with tilt back stand)
Weight: 2.4lbs (1.09Kg)WITH Tilt-Back Stand/ 2.3lbs (1.04Kg) WITHOUT Tilt-Back Stand
We are open Tuesday-Saturday from 10am until 6pm CDT.
Any order placed before 3pm CDT Tuesday through Saturday is processed for shipment the same day. Orders placed Sunday-Monday will be processed for shipment the following Tuesday.
For Free Shipping items, Effects pedals and small goods items are generally shipped via USPS Priority Mail, and Guitars and Amplifiers are generally shipped via UPS Ground.
Due to our central location in the middle of the US, most orders will be delivered within 1-3 days delivery time.
Other shipping methods are available (at an additional cost), including next day air.
Please call us directly at (972)540-6420 if you have any questions regarding shipping for your order.
Product Videos
Videos Hide Videos Show Videos
Custom Field
Returns Accepted NO
