Presenting the Synergy SYN-1 Single Module Tube Preamp for use with Synergy Preamp modules.
Unlock the full potential of your Synergy preamp modules with the convenient and powerful SYN-1 Single Module Tube Preamp. The SYN-1 is a roadworthy, professional housing that is compatible with any of Synergy’s interchangeable preamp modules. Want to change your sound? Simply slide in a different Synergy preamp module and you can access a whole new array of boutique amp tones.
The SYN-1 provides a powerful, flexible gateway to boutique tone in several different ways. Using the SYN-1 loaded with a Synergy module you can:
NOTE: The SYN-1 requires a Synergy preamp module to be installed in order to operate (sold separately).
Synergy hardware and interchangeable pre-amps are protected under US patent.
California Prop 65 warning
Unlock the full potential of your Synergy preamp modules with the convenient and powerful SYN-1 Single Module Tube Preamp. The SYN-1 is a roadworthy, professional housing that is compatible with any of Synergy’s interchangeable preamp modules. Want to change your sound? Simply slide in a different Synergy preamp module and you can access a whole new array of boutique amp tones.
The SYN-1 provides a powerful, flexible gateway to boutique tone in several different ways. Using the SYN-1 loaded with a Synergy module you can:
- Go direct out (XLR or ¼”) into a recording console, concert venue mixer or powered monitor
- Add two new “boutique” channels to your current amp via the series effects loop
- Run from the direct out of the Synergy into your current amp’s input if there is no effects loop (This method does NOT bypass your preamp, and only gives you the 2 channels of your Synergy module).
GOING DIRECT
By taking advantage of the SYN-1’s direct recording and performance capabilities, you’ll send the real sound and feel of some of the world’s most iconic tube amplifiers right to your track or front-of-house. This is true tube-driven tone, not a digital emulation. The SYN-1’s direct XLR output boasts a cabinet simulation that is second to none, offering you a studio-grade tone that is as effortless to attain as hooking up an XLR cable.
Do you have your own impulse response (IR) that you’d rather use? No problem. Simply bypass the cab sim on the back of the unit. And to further dial in your tube-amp experience, Synergy worked hand in hand with legendary amp designer, Steven Fryette to outfit the SYN-1 with a front-mounted Sag control, supplying you with the feel and response that only a great tube amp can give.
TURN ANY AMP INTO A “BOUTIQUE” TONE MACHINE
By hooking the SYN-1 to your existing amp’s series effects loop with a straightforward 3-cable method, you’re able to footswitch between the two channels on your Synergy preamp module AND your amp’s built in channel(s). By clicking ‘bypass’ on the footswitch, you’ve now bypassed the amplifier’s preamp, giving complete tonal control to the SYN-1, and can switch between the two channels of the module. With the simple swap of a module you can turn any amp into a Diezel VH4, Friedman BE, Morgan AC40, or any other of the top-tier amps recreated in the Synergy line. Because each Synergy tube preamp module boasts two footswitchable channels, and an effects loop, you can effortlessly call up new tones on the fly. Best of all, with the SYN-1’s onboard effects loop, you still have the ability to run your favorite rack and stompbox effects before or after the preamp section.
You might ask, “but my amp doesn’t have a series effects loop… can I still use the Syn1?” The answer is YES! You would simply use the ¼” direct out into the input of your amp. However, this method will only allow the use of the 2 channels on the Synergy module, and will not bypass the preamp of your existing amp… but it WILL give you two boutique amp channels!
By taking advantage of the SYN-1’s direct recording and performance capabilities, you’ll send the real sound and feel of some of the world’s most iconic tube amplifiers right to your track or front-of-house. This is true tube-driven tone, not a digital emulation. The SYN-1’s direct XLR output boasts a cabinet simulation that is second to none, offering you a studio-grade tone that is as effortless to attain as hooking up an XLR cable.
Do you have your own impulse response (IR) that you’d rather use? No problem. Simply bypass the cab sim on the back of the unit. And to further dial in your tube-amp experience, Synergy worked hand in hand with legendary amp designer, Steven Fryette to outfit the SYN-1 with a front-mounted Sag control, supplying you with the feel and response that only a great tube amp can give.
TURN ANY AMP INTO A “BOUTIQUE” TONE MACHINE
By hooking the SYN-1 to your existing amp’s series effects loop with a straightforward 3-cable method, you’re able to footswitch between the two channels on your Synergy preamp module AND your amp’s built in channel(s). By clicking ‘bypass’ on the footswitch, you’ve now bypassed the amplifier’s preamp, giving complete tonal control to the SYN-1, and can switch between the two channels of the module. With the simple swap of a module you can turn any amp into a Diezel VH4, Friedman BE, Morgan AC40, or any other of the top-tier amps recreated in the Synergy line. Because each Synergy tube preamp module boasts two footswitchable channels, and an effects loop, you can effortlessly call up new tones on the fly. Best of all, with the SYN-1’s onboard effects loop, you still have the ability to run your favorite rack and stompbox effects before or after the preamp section.
You might ask, “but my amp doesn’t have a series effects loop… can I still use the Syn1?” The answer is YES! You would simply use the ¼” direct out into the input of your amp. However, this method will only allow the use of the 2 channels on the Synergy module, and will not bypass the preamp of your existing amp… but it WILL give you two boutique amp channels!
NOTE: The SYN-1 requires a Synergy preamp module to be installed in order to operate (sold separately).
California Prop 65 warning
Dimensions: 9.75″(L) x 8.5″(W) x 3.25″(H)
Weight: 7 lbs.
We are open Tuesday-Saturday from 10am until 6pm CDT.
Any order placed before 3pm CDT Tuesday through Saturday is processed for shipment the same day. Orders placed Sunday-Monday will be processed for shipment the following Tuesday.
For Free Shipping items, Effects pedals and small goods items are generally shipped via USPS Priority Mail, and Guitars and Amplifiers are generally shipped via UPS Ground.
Due to our central location in the middle of the US, most orders will be delivered within 1-3 days delivery time.
Other shipping methods are available (at an additional cost), including next day air.
Please call us directly at (972)540-6420 if you have any questions regarding shipping for your order.
