Cioks DC10 Pedalboard Power Supply

Presenting the Cioks DC10 Pedalboard Power Supply, the original unit that helped put Cioks on the map with touring guitarists.

The DC10 is a multi-output power supply for effect pedals based on a toroidal transformer. It has 10 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it’s a perfect solution for bigger rigs with DC powered pedals only.

The three powerful sections of the DC10 with 400mA each will power modern digital pedals with special requirements like Strymons, Eventides, TC Electronic Nova-series pedals or TC Helicon pedals, Moogerfoogers, Radial Tonebone pedals or others without the need of special cables.

Selectable with a switch, the DC10 offers voltages 9, 12 and 15V, and combined with the included Stack Flex or Series adapter Flex also 18 and 24V. The first 4 isolated outlets offering 4x100mA are perfect for standard 9V low current pedals.

Features of the DC10 at a glance:

• 10 outlets configured in 8 isolated sections
• Toroidal transformer with additional electromagnetic field shielding
• 3 powerful DC sections with 400mA each
• 15V option for Radial Tonebone pedals
• Short circuit protection of all outlets
• Advanced LED monitoring of each section
• Temperature monitoring
• 120 or 230V mains voltage operation
• A total of 16 Flex cables included
• Split Flex for powering two pedals of one outlet included
• Stack Flex and Series adapter Flex for powering 18 or 24V pedals included
• Compatible with Pedaltrain and Temple Audio pedalboards
• Mounting bracket and all pedalboard mounting hardware included

What's in the box with the DC10:

• Mains power cord
• 16 Flex cables:
• Type 1 – black with 5,5/2,1mm centre negative DC plug x8
• Type 2 – red with 5,5/2,1mm centre positive DC plug x1
• Type 4 – green with 5,5/2,5mm centre positive DC plug x2
• Type 5 – black with 3,5mm tip positive Jack plug x1
• Type 6 – black with 9V battery clip x1
• Split Flex type 1 – black, powers two pedals of a single outlet x1
• Stack Flex type 1 – white/black, adds voltages of two outlets x1
• Series Adapter Flex – white, adds voltages of two outlets x1
• Pedalboard mounting hardware: mounting bracket, screws, washers, stand-off and hex key
• Manual
• Product sheet (drill guide)
• Flex guide