Presenting the Jackson Audio Mateus Asato Signature Asabi Overdrive and Distortion pedal.
The Mateus Asato Signature Pedal, the ASABI, is a distortion and overdrive pedal that contains a HUGE array of tones and is also the world's first pedal to feature analog distortion plug-ins.
To keep things interesting on your pedalboard, the team at Jackson Audio developed the technology to create replaceable distortion plug-ins so you can swap the distortion circuit in the ASABI without having to buy a completely new pedal. Because everyone likes to try out new pedals, these affordable plug-ins allow you to buy the pedal once and update it with new plug-ins whenever you want.
The name ASABI, which means, "of unusual birth" was chosen by Mateus because it speaks to the unique nature of this pedal, as well as his own family heritage. Keep reading below to learn more about how the ASABI can bring your tone to life in new and creative ways.
The stock distortion plug-in of the ASABI is called the MODERN HIGH GAIN and is a high-gain, hard-clipping circuit that is based on the Marshall JCM800. Because of this, the resulting tone is very open, crisp and addictingly fun to play! Everything from 80's hard rock to more modern high gain tones can easily be found in the ASABI!.
The Asabi allows for 4 different presets of clipping diodes which themselves drastically alter the tone and feel of the way the distortion clips.
GAIN CYCLE takes the GAIN knob setting, which selects your maximum gain, and divides that level of gain into 4 equal parts. Say for instance you have your GAIN knob set at the maximum setting or in other words, 100% gain. Every time you press both footswitches simultaneously, the gain of the pedal will jump up 25% until you get to 100%. The following press after 100% will cause the gain cycle to start again at 25%.
Let’s assume the GAIN control is set to 100%
CABLE INFORMATION: In order to use MIDI on the Asabi, you will need a cable that converts a MIDI (DIN-5) connector to a TRS cable.
The Mateus Asato Signature Pedal, the ASABI, is a distortion and overdrive pedal that contains a HUGE array of tones and is also the world's first pedal to feature analog distortion plug-ins.
To keep things interesting on your pedalboard, the team at Jackson Audio developed the technology to create replaceable distortion plug-ins so you can swap the distortion circuit in the ASABI without having to buy a completely new pedal. Because everyone likes to try out new pedals, these affordable plug-ins allow you to buy the pedal once and update it with new plug-ins whenever you want.
The name ASABI, which means, "of unusual birth" was chosen by Mateus because it speaks to the unique nature of this pedal, as well as his own family heritage. Keep reading below to learn more about how the ASABI can bring your tone to life in new and creative ways.
The stock distortion plug-in of the ASABI is called the MODERN HIGH GAIN and is a high-gain, hard-clipping circuit that is based on the Marshall JCM800. Because of this, the resulting tone is very open, crisp and addictingly fun to play! Everything from 80's hard rock to more modern high gain tones can easily be found in the ASABI!.
The most groundbreaking feature of the ASABI, the true analog distortion plug-ins allow you to completely change the distortion circuit in the ASABI without having to buy a completely new pedal. These are not software updates that load a different preset; they are completely analog circuit boards that contain all the opamps, transistors, diodes, resistors and capacitors that make up a distortion pedal.
The Asabi allows for 4 different presets of clipping diodes which themselves drastically alter the tone and feel of the way the distortion clips.
To select a clipping preset, press and hold the DIST footswitch for more than 1 second and the clipping program mode will become active. When in this mode, the DIST led will flash to indicate that you are in programming mode. A quick tap on the DIST footswitch will cycle the clipping presets and you’ll be able to hear these presets change as you cycle through them, assuming that the drive circuit was active when the clipping program mode was entered. Once you arrive at a distortion preset that you want to use, press and hold the DIST footswitch for more than 1 second and clipping program mode will exit.
- Preset 1 - AMBER: Guv'nor Style. Two LED’s are used to symmetrically clip the top and bottom portions of your guitars waveform evenly. The LED’s allow MUCH higher headroom so your tone will stay more open and less compressed much like a vintage Marshall.
- Preset 2 - GREEN: Rat Style. Two symmetrical silicon diodes give the classic drive and compression that the Rat is known for.
- Preset 3 – BLUE: ASYMMETRIC HIGH GAIN. Three asymmetric diodes (two silicon and one LED) will clip the top and bottom portions of your guitars waveform differently resulting in a more complex and interesting tone. This sounds great when laying down aggressive rhythm parts!
- Preset 4 - MAGENTA: SYMMETRICAL HIGH GAIN. Four symmetric silicon diodes will clip the top and bottom portions of your guitars waveform evenly which gives a more focused and direct tone.
Changing clipping diodes are a great way to radically change how a distortion pedal sounds and feels but oftentimes the change that you perceive has more to do with a change in volume than an actual change in tone….until now.
When Jackson Audio were designing the Asabi they knew we wanted to give the distortion section a lot of tonal flexibility and most importantly make that flexibility useful on stage. So when changing clipping presets they included circuitry that level matches the output of the pedal as various clipping diodes are selected. So now you can select between all four clipping options, your volume level will remain constant. More importantly, the difference that you hear between the clipping presets will be because of the difference in how those clipping diodes sound and not because your volume is jumping all over the place as it does with other designs.
GAIN CYCLE takes the GAIN knob setting, which selects your maximum gain, and divides that level of gain into 4 equal parts. Say for instance you have your GAIN knob set at the maximum setting or in other words, 100% gain. Every time you press both footswitches simultaneously, the gain of the pedal will jump up 25% until you get to 100%. The following press after 100% will cause the gain cycle to start again at 25%.
TIP: Set the GAIN control to around 3:00+ to have 4 distinct distortion settings as you cycle through the gain.
The goal with the GAIN CYCLE feature is to allow guitarists to easily ramp their gain up without having to bend down and change it or try to adjust it with the edge of their foot while playing live. Here’s a perfect use case.
The goal with the GAIN CYCLE feature is to allow guitarists to easily ramp their gain up without having to bend down and change it or try to adjust it with the edge of their foot while playing live. Here’s a perfect use case.
Let’s assume the GAIN control is set to 100%
- Verse 1 – Gain cycle set at 25% – Lightly distorted tone.
- Press GAIN CYCLE
- Chorus – Gain cycle set at 50% – Distinct distorted tone.
- Press GAIN CYCLE
- Bridge – Gain cycle set at 75% – Heavy distorted tone.
- Press GAIN CYCLE
- Solo – Gain cycle set at 100% – Heavily saturated distorted tone!
- TIP: Add the DRIVE to push the overdrive even harder for endless sustain!
It’s important to remember that GAIN CYCLE setting #4 (100%) will be as much gain as you have the GAIN knob set for. Think of the GAIN knob on the Asabi as your maximum gain with each GAIN CYCLE setting being a percentage of that maximum value.
The brightness of the DIST led will change to let you know which percentage of gain you have selected. The higher the percentage, the brighter the DIST led. For instance:
The brightness of the DIST led will change to let you know which percentage of gain you have selected. The higher the percentage, the brighter the DIST led. For instance:
- GAIN CYCLE #1 – DIM LED – 25% of GAIN knob value.
- GAIN CYCLE #2 – BRIGHTER LED – 50% of GAIN knob value.
- GAIN CYCLE #3 – BRIGHT LED – 75% of GAIN knob value.
- GAIN CYCLE #4 – VERY BRIGHT LED – 100% of GAIN knob value.
To top it off, the distortion circuit of the Asabi has a 3 band parametric EQ. The EQ circuit features a studio grade EQ that gives tremendous tonal flexibility to the Asabi. Based on the legendary Baxandall EQ that is featured in countless studio EQ’s, the Asabi EQ takes this circuit and tailors it for guitarists!
Another feature of the EQ that is unique to the Asabi is there are 6 internal trimmers that allow the player to adjust the Q (how narrow or wide the selected frequency is) and frequency select of each EQ band. This is an advanced feature of the Asabi and care should be taken as extreme settings can make the EQ sound unmusical.
The drive circuit in the Asabi is a soft clipping circuit that was designed to capture the smooth overdrive and touch responsiveness of a vintage Marshall Plexi. This circuit, which is in its own true bypass loop, can be used independently of the DIST circuit and is very useful for boosting the front end of the distortion circuit for even higher gain.
Just like the distortion circuit, the overdrive circuit on the Asabi features 4 clipping presets so you can adjust the tone and feel of the overdrive.
NOTE: When using both the overdrive and distortion channels simultaneously, the volume control on the overdrive channel gives way to the volume control on the distortion channel which now becomes the master volume control. This was done because each circuit has so much output available, that if the output of the overdrive channel were pushed too hard into the input of the distortion channel, it had the potential to cause instability and unwanted noises etc.
- Preset 1 - AMBER: Vintage Marshall. Two RED LED’s are used to symmetrically clip the top and bottom portions of your guitars waveform evenly. The LED’s allow MUCH higher headroom so your tone will stay more open and less compressed much like a vintage Marshall.
- Preset 2 - GREEN: Classic Screamer. Two symmetrical silicon diodes give the classic drive and compression that the Tube Screamer is known for.
- Preset 3 – BLUE: Asymmetric Clipping. Three asymmetric diodes (two silicon and one red LED) will clip the top and bottom portions of your guitars waveform differently resulting in a more complex and interesting tone. This sounds great when laying down aggressive rhythm parts!
- Preset 4 - MAGENTA: Symmetrical Clipping. Four symmetric silicon diodes will clip the top and bottom portions of your guitars waveform evenly which gives a more focused and direct tone. Two notable pedals that uses this style of clipping are the Timmy and the King of Tone.
MIDI FEATURES
It's 2020 and it's time to expect more from an analog pedals! Since the BROKEN ARROW came out in 2019, our more advanced overdrive pedals have featured MIDI control over clipping presets, gain cycle options, drive eq options as well as ON/OFF of the overdrive and drive circuits and the Asabi is no exception. Jackson Audio always want to make sure that their pedals are as easy to integrate into complex rigs as they are into simple rigs and MIDI makes that happen.
It's 2020 and it's time to expect more from an analog pedals! Since the BROKEN ARROW came out in 2019, our more advanced overdrive pedals have featured MIDI control over clipping presets, gain cycle options, drive eq options as well as ON/OFF of the overdrive and drive circuits and the Asabi is no exception. Jackson Audio always want to make sure that their pedals are as easy to integrate into complex rigs as they are into simple rigs and MIDI makes that happen.
True Bypass for each channel
Input Impedance: 1M
Output Impedance: 100k
Power Supply: DC
Voltage Input: 9V MAX
Polarity: Center Negative
Min Current Required: 160mA
Dimensions: 2.7” x 4.875"
We are open Tuesday-Saturday from 10am until 6pm CDT.
Any order placed before 3pm CDT Tuesday through Saturday is processed for shipment the same day. Orders placed Sunday-Monday will be processed for shipment the following Tuesday.
For Free Shipping items, Effects pedals and small goods items are generally shipped via USPS Priority Mail, and Guitars and Amplifiers are generally shipped via UPS Ground.
Due to our central location in the middle of the US, most orders will be delivered within 1-3 days delivery time.
Other shipping methods are available (at an additional cost), including next day air.
Please call us directly at (972)540-6420 if you have any questions regarding shipping for your order.
Product Videos
Videos Hide Videos Show Videos
Custom Field
Returns Accepted NO
